No grounding location for C920048P

[Gabe215]

Due to contract purposes and the granular nature of how certain contracts are written, It seems, there is no marked ground location on the C9200-48P switches. The Cisco Catalyst 9200 Series Switches Hardware Installation Guide under SYSTEM GROUNDING specifically states: NOTE: Grounding lugs must be installed on the location marked chassis only.

CISCO where is the grounding location?

CISCO please provide some technical vendor documentation that specfically states something useful.

If said company cannot properly ground the install per vendor documentation we have wasted time and money.  

[Reza Sharifi]

If there is no place to ground the switch, just make sure your rack or cabinet is grounded.

HTH

[Reza Sharifi]

There should be something similar to Figure 16 #2 in this link:

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9200/hardware/install/b-c9200cx-hig/Installing-a-compact-switch.html

HTH

[Gabe215]

Unfortunately verbage in contract writing doesnt allow for hypotehticals. Everything must be in black and white. And in reply to your other post, Yes 100% on the C9200cx's there is a spot specifically for the ground but not on the the C920048P's