08-06-2013 05:22 AM - edited 03-07-2019 02:46 PM
Hello does someone knows why I get this error on my Nexus 1000V version 4.2(1)SV2(1.1a) ?
switch-01(config)# class-map type queuing pippo
ERROR: Command (id: 2) not supported
should I enabe queuing somewhere ?
Thank you in advance ...
08-06-2013 06:56 AM
Alberto,
Canyou try your command again but like these:-
class-map type queuing match-any pippo
or
class-map type queuing match-all pippo
Regards,
Alex.
Please rate useful posts.
08-06-2013 06:59 AM
As before ... same problem ..
switch-01(config)# class-map type queuing match-any pippo
ERROR: Command (id: 2) not supported
switch-01(config)# class-map type queuing match-a
match-all match-any
switch-01(config)# class-map type queuing match-all pippo
ERROR: Command (id: 2) not supported
switch-01(config)#
08-06-2013 08:00 AM
Alberto,
According to the QOS config guide for your version :-
The olny item I can see that may be stopping the command is :-
Queuing is only supported on ESX or ESXi 4.1.0 or later hosts.
If you are meeting the criteria I think you should raise a TAC -- I could not find any bug for this
Regards,
Alex.
Please rate useful posts.
08-06-2013 10:42 PM
Strange because ESXi is VMware ESXi 5.1.0 Releasebuild-1117900 (3.1)
nobody else got this error ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide