ntp clock period configuration

[johnlloyd_13]

hi,

can someone give me a link or on how to configure ntp clock <period>. do we calculate for it or is it there a default?

Router(config)#ntp clock ?

<0-4294967295> Clock period in 2^-32 seconds

[Mark Yeates · Accepted solution]

John,

There is no need co configure the NTP clock period. It is not recommended to set the clock period as the defaults will work just fine. Please see the following links.

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_q_and_a_item09186a0080093f16.shtml#qa3

and

http://www.cisco.com/en/US/docs/ios/12_1/configfun/command/reference/frd3003.html#wp1018798

HTH,

Mark