hi all
i have problem in my fmc cisco virtual
i configured the fmc to take the time from NTP server in my AD server and i allowed the port 123/UDP to this server
but the FMC always use the own time 127.127.1.1
remote refid st t when poll reach delay offset jitter
==============================================================================
srv-dcp.steg-is 51.140.127.197 3 u 50 64 377 0.403 -7.631 2.320
*LOCAL(1) .SFCL. 12 l 18 64 377 0.000 0.000 0.000
root@STEGfirepower:/Volume/home/admin# ntpq -pn
remote refid st t when poll reach delay offset jitter
==============================================================================
192.168.1.201 51.140.127.197 3 u 46 64 377 0.427 -11.760 1.892
*127.127.1.1 .SFCL. 12 l 42 64 377 0.000 0.000 0.000
root@STEGfirepower:/Volume/home/admin#
please how can i change my ntp server to primary in FMC
thanks team
