I need to implement ACL in router using object group method. The scenario is host(126.96.36.199) send images to 3 servers ( 188.8.131.52,184.108.40.206, 220.127.116.11) via tcp port 3320,104,2104 and the host retrieve data from the server via same port.
Appreciate your advise on this on how to implement.Please advice below config are correct
object-group network ACL_device
object-group service server_Port
description Service Port
tcp eq 3320
tcp eq 104
tcp eq 2104
object-group network ACL_server
ip access-list extended ACL_XX
remark device to send data to server
permit object-group ACL_device object-group server_Port object-group ACL_server
remark device to retrive data from server
permit object-group ACL_server object-group server_Port object-group ACL_device
! int Po1 ip access-group ACL_XX in ip access-group ACL_XX out
After my first publication of the book OSPF Demystified With RFC in 2014 which goes beyond the CCIE level which explores OSPF from the RFC's perspective. Since one year I had the idea : why not write a book for CCIE Enterprise and Infrastructure to be an ...
Do you use Cisco DNA Center? Have you used and are you willing to provide your feedback in using the Cisco DNA Center help and documentation?
If so, we’d like you to complete the survey linked below. Your feedback will help provide more effective and easi...
Listen: https://smarturl.it/CCRS9E18Follow us: https://twitter.com/CiscoChampion Reaching the height of your career is no simple feat. It often requires a combination of pursuing the right education, building the right professional network and being ...