09-29-2011 06:05 PM - edited 03-07-2019 02:31 AM
Hi All,
There is a open caveat CSCtn11683 on Cisco Catalyst Switch 3750X. In Cisco switch IOS release note, this is how this bug is being documented.
==============================
CSCtn11683 (Catalyst 3560-X and 3750-X)
A Catalyst 3560-X or 3750-X switch port might stop forwarding traffic. The packet counters increment for sent packets, but not for received packets.
The workaround, to bring up the port, is to save the configuration and to restart the switch.
===============================
By searching Cisco Bug ID Tool, it shows the following information.
===========================
Status
Open
Severity
3 - moderate
Last Modified
In Last 3 Days
Product
Cisco IOS software
Technology
1st Found-In
12.2(55)SE
12.2(55)SE1
===========================
Apparently this bug has been for a while since it was found. In the latest IOS image release 15.0(1)SE, Cisco has not come out any solution. I am wondering if anyone knows about this bug and how soon Cisco will come out a real solution to fix it.
Thanks,
Roger
09-30-2011 05:31 AM
Hi Roger,
This caveat is still open in IOS 15.0(1)SE. It has not been resolved.
HTH
10-14-2011 01:15 PM
We ran into it and are pursuing it with much interest via a different avenue. Have some information saying that it may be fixed soon. I can't access that bug ID any longer (which concerns me). This is a pretty big deal for us.
Rick
10-14-2011 01:53 PM
Thanks for the reply. This issue is a big concern for us as well. We are holding any further puchase on this type model before Cisco comes out a permanent solution.
Regards,
Roger
10-15-2011 10:45 AM
It is about to be fixed,but fix will be available only in next major release(15.0(2)SE),and the maintenance build for 12.2(55)SE,which will be 12.2(55)SE5..Timelines for both of them have not been final yet,but 12.2(55)SE5 should come out pretty soon.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide