I'm running the Cisco Plugin for Openflow 2.0.4 on Catalyst 3850 switches and have encountered an issue. Flow rules containing the mod_vlan_vid action do not function correctly. The switch does not send an error to the controller, but the flow rules never match packets and do not expire despite the idle timeout being set. Has anyone encountered this issue before?
How did you get the open-flow ova to install? I keep reading your supposed to use the virtual-service install command in enable mode, but my switch doesn't have it. I'm trying to figure out what I'm missing.
Cisco Digital Network Architecture Center Modules (Design Module)Part.3In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module.Cisco DNA Center gives us the flexibility and scalability to configure mult...
view more
Cisco 2509-RJ freezes during start-up I bought some Cisco 2509-RJ terminal server to work on my labs and was working fine. Today I turned it on and half way through starting up it seems to freeze. I can only find one instance of this happing to ...
view more
Cisco Digital Network Architecture Center Modules(Design Module)Part.2In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and availability to con...
view more
Connectivity Design considerations and recommendation
1.Management Access connectivity
If there is a dedicated OOB management path, consider connecting to CIMC and MGMT port.
If OOB path is not available, Connect the dedicated Management port to LAN Swi...
view more
