Hi everybody,
Sr because my English skill is not good so much.
Pls help me to solve the problem like this: I create a network with OSPF point-to-multipoint area 0 run over Frame Relay, and some none-backbone area OSPF run over ethernet. and problem here is: I cannot ping from one ethernet area to the ip of area 0.
The attached file is my config and my network.
I cannot ping from area 1 to area 0, while the ping test from area 3 & area 5 to area 0 are normal.
example:
R6#traceroute 55.0.0.5 source 146.0.0.6
Type escape sequence to abort.
Tracing the route to 55.0.0.5
VRF info: (vrf in name/id, vrf out name/id)
1 146.0.0.1 12 msec
146.0.0.4 8 msec
146.0.0.1 4 msec
2 * * *
3 * * *
4 * * *
5 * * *
6 * * *
7 * *
Pls help me !
Thanks so much !
Duong Vu
