Hi,
I
have notoiced that some of our devices are generating OSPF traps with
what appears to be the wrong OID, and as a consequence it is not coming
through formatted properly.
We have a few CAT 4500 devices running IOS 12.2, and these devices are sending OSPF traps with the following OID:
.1.3.6.1.2.1.14.16.0.2
We have other devices, of various models, running IOS 12.4, and they send the OSPF traps with the following OID:
.1.3.6.1.2.1.14.16.2.0.2
The MIB definition I use, has the .1.3.6.1.2.1.14.16.2.0.2 definition, ie the extra 2 in it.
I
am wondering if it has been corrected in a later IOS version, and
therefore I am going to have to upgrade the IOS version to correct
this? Or, is there something else I am missing?
Regards
Jef
Hi Jef,
Try with below mentioned MIB for OSPF traps
http://www.oidview.com/mibs/0/OSPF-TRAP-MIB.html
Hope to Help !!
Ganesh.H