cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
578
Views
0
Helpful
2
Replies

OutDiscards on WS-C2960S-48TS-L

SOGECAP
Level 1
Level 1

hello,

 

for one month i have a weird problem. Some user (on the same swithc) are complaining about network (lost connectivy, spike etc.).

 

we checked the computers, but nothing on them.

 

when i check the errors on the switch, every ports where a computer is, i have the same OutDiscards, so, i'm wondering if is it the switch the issue and not computers (or cables etc.)

 

i did some test cable-diagnostic and nothing appears also

 

(we forced computer on 10 mbps and port switch too)

 

switch : WS-C2960S-48TS-L

iOS : 15.0(2)SE5

 

Port        Align-Err     FCS-Err    Xmit-Err     Rcv-Err  UnderSize  OutDiscards
Gi1/0/1             0           0           0           0          0         1289
Gi1/0/2             0           0           0           0          0         1288
Gi1/0/3             0           0           0           0          0         1289
Gi1/0/4             0           0           0           0          0         1288
Gi1/0/5             0           0           0           0          0         1289
Gi1/0/6             0           0           0           0          0         1289
Gi1/0/7             0           0           0           0          0         1289
Gi1/0/8             0           0           0           0          0         1290
Gi1/0/9             0           0           0           0          0            0
Gi1/0/10            0         241           0         241          0         1291
Gi1/0/11            0           0           0           0          0         1291
Gi1/0/12            0           0           0           0          0         1291
Gi1/0/13            0           0           0           0          0         1288
Gi1/0/14            0           0           0           0          0            0
Gi1/0/15            0           0           0           0          0         1292
Gi1/0/16            0           0           0           0          0            0
Gi1/0/17            0           0           0           0          0         1289
Gi1/0/18            0           0           0           0          0         1277
Gi1/0/19            0           0           0           0          0         1286
Gi1/0/20            0           0           0           0          0            0
Gi1/0/21            0           0           0           0          0         1276
Gi1/0/22            0           0           0           0          0         1289
Gi1/0/23            0           0           0           0          0         1289

 

thx for any tips and advices

2 Replies 2

Leo Laohoo
Hall of Fame
Hall of Fame

Post the output to the following commands: 

 

1.  sh version; 

2.  sh interface <BLAH>; and

3.  sh controll e <BLAH>

Hello,

we reboot the switch and force switch ports and NIC computer to 10 full and 100 full after, sounds good at this moment (and we did some clear counters) so "sh int" or "sh controll" gonna be useless :p

 

i'll do some update if pbm come back