Packet Analysis on cisco Nexus3500 C3548P-10GX Chassis

[EArohitsingh]

Hi. Following are the details of the switch

cisco Nexus3500 C3548P-10GX Chassis
Intel(R) Core(TM) i3- CPU @ 2.50GHz with 16396528 kB of memory.
Processor Board ID FOC25244X6C

We were interested in doing the analysis of packets (particularly TCP/UDP) on the switch to diagnose the issue of packet drops. Capturing Packet and saving it doesn't seem a feasible option on this particular Hardware. 

Was wondering if there exists a way to analyze TCP/UPD packets on the particular switch, with/without capturing packet.

[Jan Rolny]

Hello,

have you tried "ethanalyzer local"?

Detailed description is on link below:

https://community.cisco.com/t5/networking-knowledge-base/using-ethanalyzer-on-nexus-platform-for-control-plane-and-data/ta-p/3142665

Best regards,

Jan

[Pavel Tarakanov]

One of the option - ethanalyzer, but it will be able to capture only control plane traffic (punted to CPU).

Other option - SPAN to one of the ports. Details can be found in configuration guide:

https://www.cisco.com/c/en/us/td/docs/dcn/nx-os/nexus3548/103x/configuration/system-management/cisco-nexus-3548-switch-nx-os-system-management-configuration-guide-103x/m-configuring-span.html