packet tracer "Server Reset Connection" error

[jenia69]

Hello.

I'm working on a simple project and I have encountered an error where I cant access the HTTPS server via any terminal on the network. Any other post I have seen on the subject were either not relevant or I lacked sufficient knowledge to understand what was said.

.pkt file attached in a zip folder.

thank you for help.

[Flavio Miranda]

Hi

  You network is working. But you need to enable the HTTP service on the HTTP server.

[jenia69]

That will solve the issue, but can I run HTTPS only, or does the server has to have both HTTP and HTTPS enabled if I want to run an HTTPS server?

[Flavio Miranda]

 Yeah, for me both worked independently. 

 

[jenia69]

Weird, both for me and my partner the server didn't want to respond properly.

You're saying the network is good, any idea why we faced the "server reset connection" message while you didn't?

P.S

Thank you for checking our work and responding.

[Flavio Miranda · Accepted solution]

Yeah, no problem on the network as you can see here. 

What can be happening is bug. This messages "server reset connection"  means the server does not accept the connection but is does not means it does not received it.

What you can try is replace the server.  Seems that you are enable the HTTP/HTTPS server and the server is not assuming the config.

Just keep in mind that for test you need to use:

http://18.0.0.3   - for HTTP

https://18.0.0.3 - for HTTPS

[gkaycia]

I got request timed out with 100% loss

[davidbuchan1000]

i found this really helpful