Good day all, my question is going to be really easy for all you experts out there, might be so easy you actually forgot since it has been such a long time for something like this. I have a cisco 806 dual ethernet router connected to a cable modem, after about 2 weeks and multiple tickets with my ISP, i got the ios upgrade to be able to pull a valid dhcp address for the ethernet1(wan) interface. But now i can not get it to do any Nat/Pat translations, i can ping out from the router fine, however from any device on the lan i cant get past the wan port on the router, can you look over my config and clue me in please.
!
! Last configuration change at 02:02:56 UTC Fri Feb 23 2007
! NVRAM config last updated at 01:38:34 UTC Fri Feb 23 2007
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname 806Gate
!
no logging console
enable secret ****
enable password ********
!
username **** privilege 15 password 0 ********
ip subnet-zero
no ip routing
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool Clients
network 10.10.10.0 255.255.255.0
dns-server 65.32.1.70
default-router 10.10.10.1
!
!
!
!
interface Ethernet0
description LAN
ip address 10.10.10.1 255.255.255.0
ip nat inside
no ip route-cache
no ip mroute-cache
no cdp enable
!
interface Ethernet1
description Internet
ip address dhcp client-id Ethernet1 hostname 806Gate
ip access-group 1 in
ip nat outside
no ip route-cache
no ip mroute-cache
no cdp enable
!
ip nat inside source list 1 interface Ethernet1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Ethernet1
ip http server
ip http authentication local
!
!
access-list 1 permit 10.10.10.0 0.0.0.255
no cdp run
banner login ^C
We know where you live.... ^C
banner motd ^C
If you see the buddha, kill the buddha... ^C
!
line con 0
exec-timeout 0 0
stopbits 1
line vty 0 3
exec-timeout 0 0
password ******
login local
length 0
transport input telnet
!
scheduler max-task-time 5000
ntp clock-period 17176398
ntp server 192.*.*.209
end
Thanks for any help....
M@
