Hi All,
i have a cisco 6509 switch and one of the interface is connected to the server. I'm seeing lot of pause output on that particular interface.
when i checked the load on the interface for the past one month , it is only 1 to 5% utilized (both input and output). Please help me on the pause output. The connectiviy to the server is facing frequent disconnection.
Full-duplex, 1000Mb/s, media type is 10/100/1000BaseT
input flow-control is off, output flow-control is on
Clock mode is auto
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:00, output hang never
Last clearing of "show interface" counters 3d00h
Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 685000 bits/sec, 178 packets/sec
5 minute output rate 1384000 bits/sec, 245 packets/sec
23852457 packets input, 17164191388 bytes, 0 no buffer
Received 1087 broadcasts (8 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
27087241 packets output, 15305053462 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 5994 PAUSE output
0 output buffer failures, 0 output buffers swapped out
Regards,
Mohan N
