10-05-2014 08:48 AM - edited 03-07-2019 08:59 PM
switchport access vlan
switchport mode access
authentication order mab
authentication port-control auto
mab
dot1x pae authenticator
-------------------------------------
switch log :
%LINEPROTO-5-UPDOWN: Line protocol on Interface, changed state to down
%LINK-3-UPDOWN: Interface, changed state to down
Solved! Go to Solution.
10-05-2014 10:54 AM
Since you're using MAB (MAC Authentication Bypass) you should be checking your RADIUS server (ACS or ISE probably) for the settings particular to the port.
MAB is a means of ensuring only a specific device is allowed to connect to a given port or switch.
10-05-2014 10:54 AM
Since you're using MAB (MAC Authentication Bypass) you should be checking your RADIUS server (ACS or ISE probably) for the settings particular to the port.
MAB is a means of ensuring only a specific device is allowed to connect to a given port or switch.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide