10-30-2020 12:40 PM - edited 10-30-2020 12:42 PM
Can Pin #4 on the IR829 DC power cord be used at all for GPIO purposes? I'm looking to connect a "high / low" input sensor to the IR829 and don't see any available GPIO ports to use.
11-02-2020 08:16 AM
- the connector is a power connector not a data-connector !
- as it is described as a "spare" Cisco may use this pin on future power supplies without any notice
-> troubles when the power supply needs to be replaced.
- if you want to use this pin you need to open the box to connect some signal inside the box to the pin
=> NO in my opinion this not available as a GPIO pin.
- if you DO open the box you can also add an extra connector or cable leading outside the box
11-02-2020 09:16 AM
Thank you for your response.
Is there an extra GPIO port INSIDE the router box?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide