06-12-2016 11:10 AM - edited 03-08-2019 06:10 AM
I have a pix 535, 3550 12T and a 3550 12G.
The 3550 12T and 12G are connected via etherchannel using layer 3 ports.
The 12G is connected to the PIX via layer 3 port.
I am troubleshooting via PING these are my results.
HOST can ping 10.1.5.9 ( vlan 2 on 12T ), 10.1.5.17 ( vlan 3 on 12T ) , 10.1.5.74 ( 12T )
PIX 535 can ping 10.1.5.2 ( 12G ), 10.1.5.73 ( 12G ),
355012T can ping 10.1.5.9 ( vlan 2 ) , 10.1.5.10 ( host ) , 10.1.5.17 ( vlan 3 ), 10.1.5.18 ( host ), 10.1.5.74 ( 12T ), 10.1.5.73 ( 12G )
355012G can ping 10.1.5.1 ( PIX ), 10.1.5.2 ( 12G ), 10.1.5.73 ( 12G ), 10.1.5.74 ( 12T )
I have been trying to route the pix to the hosts and switches to the pix but not much luck yet.
any suggestions?
06-12-2016 01:25 PM
added a route which worked
now these are the new pings
HOST can ping 10.1.5.9, 10.1.5.17, 10.1.5.74
PIX can ping 10.1.5.2, 10.1.5.73, 10.1.5.74
355012T can ping 10.1.5.9, 10.1.5.10, 10.1.5.17, 10.1.5.18, 10.1.5.74, 10.1.5.73, 10.1.5.2, 10.1.5.1
355012G can ping 10.1.5.1, 10.1.5.2, 10.1.5.73, 10.1.5.74
06-12-2016 01:45 PM
update
The host is pinging 1 in 4 at 10.1.5.73 and same for 10.1.5.2 but pings 10.1.5.1
The 12G is pinging 1 or 2 in 5 at the vlan on 10.1.5.9 and the host on 10.1.5.10
The 12T can ping everything
the PIX cant ping the vlans or hosts
06-12-2016 02:16 PM
host can now ping 10.1.5.73, 10.1.5.2 and 10.1.5.1
12G can ping 10.1.5.9 but not hosts on 10.1.5.10
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide