cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
74
Views
0
Helpful
2
Replies
Highlighted
Beginner

Please help me in configuring a router!

Hi! I have to configure a new router with a static route. No routing protocol will be used. Since, I'm a budding Network aspirant i do not know much about things. My senior Network Engineer has asked me to configure this router. There's an apartment where our Overseas employees stay, earlier this apartment had a broadband connection which was further divided through the APs(Cisco Wireless Access Points) and made usable to around 20 users. Now, they have bought in their own lease line and I have to configure this router. Please help me doing this as I'm not aware of anything else apart from what I have written here. Thanks a ton in advance!

Everyone's tags (1)
2 REPLIES 2
Beginner

Hello,You should provide some

Hello,

You should provide some info so that people can figure out what do you want to do. For example, what kind of leased-line is it? L2 or L3? Is it like a cable connecting two sites from your company or is there any router in between from your leased-line provider...?

For what you say, the easiest thing would be to configure a default route to the other end of the leased line and voilà.

Otherwise, you can always ask your senior Network Engineer to configure it (him/her)self or ask for help to him/her.

 

Regards,

Reg.

 

 

Beginner

I have confirmed from him and

I have confirmed from him and we just need to set default route and NAT on it. And we only have to connect that router with ISP and not with our office. And I have to decide the LAN side ip address. Now help!

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards