The Main office and the Data Centre. Bothe sites are connected using VPN right now and it works fine.
We have decided to add a Layer 2 Point to Point connection between the 2 sites so that we can better connection and we want to make the point-to-point connection as the primary link and the VPN as the secondary link. If the point-to-point connection fails, then the VPN kicks in.
All the remote users will be accessing the Main office through the Data Centre.
At the Main office the point to point comes in on port 24 and port 22 and 23 goes to my Firewall on primary and secondary Firewall which then connects to may LAN.
In the Data center we have stacked 2 Cisco Sw 9300 stacked, and the point-to-point connection is on port 24 and then port 23 form the stacked Switch goes to port 9 on both primary and secondary Meraki which is connected to my LAN
I have some specific vlans on Main office and Data centre.
Can someone please guide me how I can achieve that.
How do I need to configure the ports on the Cisco Switch? The Fortinet part will be taken care by a contractor.