cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4664
Views
13
Helpful
10
Replies

Policy based Routing - 3750

Sheraiz Ahmad
Level 1
Level 1

Hi

I have 2 ISP connected to Router A and Router B

Both the routers are connected to the core 3750 switch.. I want to send the traffic from the switch that goes to router A to router B...

I have done the following but its not working...

vlan 120 = 10.120.0.0/24

vlan 140 = 10.140.0.0/24

access-list 120 permit ip 10.120.0.0 0.0.0.255 any

access-list 140 permit ip 10.140.0.0 0.0.0.255 any

Create a policy that matches on these acls:

route-map NewISP permit 10

match ip address 120

set ip next-hop <new asa ip>

route-map NewISP permit 20

match ip address 140

set ip next-hop <new asa ip>

Then apply to your vlan interfaces:

int vlan 120

ip policy route-map NewISP

int vlan 140

ip policy route-map NewISP

10 Replies 10

Raju Sekharan