07-05-2017 12:13 AM - edited 03-08-2019 11:12 AM
Is it possible to configure four Nexus-7000 switch within the same vpc domain?
these switches are connected to the access switches as attached picture.
Solved! Go to Solution.
07-05-2017 12:20 AM
Hi
no 2 is the max per domain but you could have 2 domains interlinked , or just add in 5ks below still gives you plenty of resiliency if done in the x design
http://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf
vPC domain is composed of two peer devices. Each peer device processes half of the traffic coming from the access layer. In case a peer device fails, the other peer device will absorb all the traffic with minimal convergence time impact.
07-05-2017 12:20 AM
Hi
no 2 is the max per domain but you could have 2 domains interlinked , or just add in 5ks below still gives you plenty of resiliency if done in the x design
http://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf
vPC domain is composed of two peer devices. Each peer device processes half of the traffic coming from the access layer. In case a peer device fails, the other peer device will absorb all the traffic with minimal convergence time impact.
07-05-2017 12:26 AM
Thanks Mark Malone.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide