Power supply AC(220v)/ DC (48v) for catalyst 3560G

[nicanor00]

Hi

I have 3 type of catalyst :  C3560G ,  C3750G and C2960

All those switch are 48V DC switches and they work fine in the 48v energy environnement(see image below).

I wants to install those 48v DC switches in an environment where there is only 220v AC energy.

I need  reference of the right power supply to help to use those 48v DC catalyst in 220v energy environement

Please help

[marce1000]

 - (I don't see an image.) The device DC arrangement is internal , you can use main external power (cord) for powering the device according to these regulations :

 https://www.cisco.com/c/dam/en/us/td/docs/switches/lan/catalyst3560/hardware/installation/legacy/3560hig_12-2_20_se1_summer04.pdf

Internal Power Supply Connector
The internal power supply is an autoranging unit that supports input voltages
between 100 and 240 VAC. Use the supplied AC power cord to connect the AC
power connector to an AC power outlet.

[nicanor00]

See the image in attachement