cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
210
Views
0
Helpful
1
Replies

PPP Stateful Switchover keepalive trouble

Vadim Semenov
Level 1
Level 1

Hi All,

i want to configure fast reconnect PPTP session from 3rd patry router to two ASR 1002, but PPTP session exceed 50sec. I've setuped SSO, but recently i know what PPTP protocol is not SSO-aware and thy most strangest is "PPP and MLP are not configurable and run by default on networking devices configured with SSO." http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ha/configuration/xe-3s/ha-xe-3s-book/ha-config-stateful-switchover.html#GUID-FBED64BD-2A3A-46DE-8818-7CAD7161BBF3

So, i couldn't dicrease 50-sec timeout?? Help please

ASR1#

redundancy inter-device

 scheme standby HA

!

ipc zone default

 association 1

  no shutdown

  protocol sctp

   local-port 10001

    local-ip 192.168.1.2

    retransmit-timeout 300 10000

   remote-port 10001

    remote-ip 192.168.1.3

vpdn enable
!
vpdn-group 1
 ! Default PPTP VPDN group
 accept-dialin
  protocol pptp
  virtual-template 1
 pptp tunnel echo 5

 

ASR2#

redundancy inter-device

 scheme standby HA

!

ipc zone default

 association 1

  no shutdown

  protocol sctp

   local-port 10001

    local-ip 192.168.1.3

    retransmit-timeout 300 10000

   remote-port 10001

    remote-ip 192.168.1.2

vpdn-group 1
 ! Default PPTP VPDN group
 accept-dialin
  protocol pptp
  virtual-template 1
 pptp tunnel echo 5

1 Reply 1

Vadim Semenov
Level 1
Level 1

and the second question is why so restrictions about default timers?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card