cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
222
Views
0
Helpful
2
Replies
suhas_syndrome
Beginner

Proble in Spanning tree over L2 inks

 

HI,

 

 I am facing problem in spanning tree over L2 link.please find the digram for your understanding.

 

  1) we have two 4500 switches in my HO as a core there are two links are connected between them & configured as a port channel.

    2) We have some server which are co locate in nearest DATA center to access that server from HO we have two L2 link between Ho & DATA center

   3) but we are facing issue in spanning tree at the end of HO switch port stat is showing forwarding state in Active switch as well standby switch & in DATA center we are facing the same problem,

     is there any challenges for spanning tree over L2 links?

2 REPLIES 2
Jon Marshall
VIP Community Legend

Are all the interconnects trunk links ?

If so please pick one vlan that is allowed on all the trunk links and from each switch post a -

"sh spanning-tree vlan <x>"  for that vlan.

Jon

Parvesh Paliwal
Participant

"spanning tree at the end of HO switch port stat is showing forwarding state" -- it may not be an error, check spanning tree status of the interfaces connecting switches. The port may have been blocked on other switch.

 

Possibly check : Show Spanning-tree