cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
663
Views
0
Helpful
2
Replies

Problem access with cisco router 1840

yasser-emish
Level 1
Level 1

I have Cisco router 1840 when we login by console cable they display xxxxxxxxxxxx

Whets problem

2 Replies 2

jestin.vj
Level 1
Level 1

Check.. Ur IOS may be corrupted !

yasser

It is possible that the IOS is corrupted. But I believe that it is much more likely that the IOS is ok and that there is a mismatch between the setting of the baud rate on the console and the setting of the terminal emulation software on your PC.

If you will try changing the setting of your terminal emulation software to various speeds you may find the speed that works and be able to access the console. With some software (especially Hyperterm) you may need to stop and restart the software each time that you change the settings. I would suggest that you start at 1200, 2400, 4800, 9600 up to the max setting of 115K. Hopefully one of these will work.

HTH

Rick

HTH

Rick
Review Cisco Networking for a $25 gift card