03-12-2015 04:02 AM - edited 03-07-2019 11:03 PM
Hi team,
I have a problem with add vrf on a interface:
SWxxx(config)#ip vrf xxx-xxx
SWxxx(config-vrf)# rd x:x
SWxxx(config-vrf)#exit
SWxxx(config)#
SWxxx(config)#interface GigabitEthernet2/0/10
SWxxx(config-if)# no switchport
SWxxx(config-if)# ip vrf forwarding xxx-xxx
% CEF table 0x2 does not exist (GigabitEthernet2/0/10). <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
SWxxx(config)#interface Vlan46
SWxxx(config-if)# ip vrf forwarding xxx-xxx
% CEF table 0x2 does not exist (Vlan46). <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Does anyone same thing happened?
Thanks
03-12-2015 07:21 AM
Hi,
Please share the output of sh ip interface GigabitEthernet2/0/1
CF
03-12-2015 07:29 AM
In this moment this interface is administratively down but int vlan 46 is UP:
SWxxx#sh ip interface GigabitEthernet2/0/10
GigabitEthernet2/0/10 is administratively down, line protocol is down
Internet address is xxx.xx.xxx.xx/xx
Broadcast address is xxx.xxx.xxx.xxx
Address determined by setup command
MTU is 1500 bytes
Helper address is not set
Directed broadcast forwarding is disabled
Outgoing access list is not set
Inbound access list is not set
Proxy ARP is disabled
Local Proxy ARP is disabled
Security level is default
Split horizon is enabled
ICMP redirects are never sent
ICMP unreachables are never sent
ICMP mask replies are never sent
IP fast switching is enabled
IP Flow switching is disabled
IP CEF switching is enabled
IP CEF switching turbo vector
IP Null turbo vector
VPN Routing/Forwarding "xxx-xxx"
IP multicast fast switching is enabled
IP multicast distributed fast switching is disabled
IP route-cache flags are Fast, CEF
Router Discovery is disabled
IP output packet accounting is disabled
IP access violation accounting is disabled
TCP/IP header compression is disabled
RTP/IP header compression is disabled
Probe proxy name replies are disabled
Policy routing is disabled
Network address translation is disabled
BGP Policy Mapping is disabled
Input features: MCI Check
Output features: Input interface drop, Check hwidb
WCCP Redirect outbound is disabled
WCCP Redirect inbound is disabled
WCCP Redirect exclude is disabled
!
SWxxx#sh ip interface vlan46
Vlan46 is up, line protocol is up
Internet address is xxx.xx.xxx.xxx/xx
Broadcast address is xxx.xxx.xxx.xxx
Address determined by setup command
MTU is 1500 bytes
Helper address is not set
Directed broadcast forwarding is disabled
Multicast reserved groups joined: 224.0.0.2
Outgoing access list is not set
Inbound access list is not set
Proxy ARP is enabled
Local Proxy ARP is disabled
Security level is default
Split horizon is enabled
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP mask replies are never sent
IP fast switching is enabled
IP Flow switching is disabled
IP CEF switching is enabled
IP CEF switching turbo vector
IP Null turbo vector
VPN Routing/Forwarding "xxx-xxx"
IP multicast fast switching is enabled
IP multicast distributed fast switching is disabled
IP route-cache flags are Fast, CEF
Router Discovery is disabled
IP output packet accounting is disabled
IP access violation accounting is disabled
TCP/IP header compression is disabled
RTP/IP header compression is disabled
Probe proxy name replies are disabled
Policy routing is disabled
Network address translation is disabled
BGP Policy Mapping is disabled
Input features: MCI Check
Output features: Input interface drop, Check hwidb
WCCP Redirect outbound is disabled
WCCP Redirect inbound is disabled
WCCP Redirect exclude is disabled
SWxxx#
Br
03-12-2015 07:39 AM
Hi,
Can you please share sh run int gi2/0/10 as well
03-12-2015 07:43 AM
SWxxx#Sh run int gi2/0/10
Building configuration...
Current configuration : 247 bytes
!
interface GigabitEthernet2/0/10
no switchport
ip vrf forwarding xxx-xxx
ip address xxx.xx.xxx.xx xxx.xxx.xxx.xxx
no ip redirects
no ip unreachables
no ip proxy-arp
shutdown
end
SWxxx#
03-13-2015 01:04 AM
Any idea??
06-24-2015 11:45 AM
Did you ever get this resolved? I'm having a similar issue..
Thx
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide