DNS server configuration on 4507+E

[suhas bhoir]

HI experts,

I am configuring my 4500 core switch as a DNS server but IP DNS SERVER command is not working...

Sup:- ws-x45-SUP7L-E

IOS:- cat4500e-universalk9.spa.03.05.03.e.152-1.e3.bin

Please assist

Suhas

[vivek srivastava]

that was old command. Use below link for configuration:

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dns/configuration/15-mt/dns-15-mt-book/dns-config-dns.html

[suhas bhoir]

Hi Vivek,

Thanks for your reply...

But my core switch not accepting IP DNS SERVER command...

is there any IOS version issue.

Thanks in advance...

Suhas

[vivek srivastava]

I don't think you need "IP DNS SERVER" command in the IOS version which you are using currently. It will work without that. Just try with the link which i shared.

[suhas bhoir]

ok....let me check..

[rosaho]

Posts in this discussion have been modified due to possible misconduct. Please refer to the CSC terms of use for more details. https://supportforums.cisco.com/document/29951/cisco-support-community-acceptable-use-agreement