04-10-2012 02:14 AM - edited 03-07-2019 06:02 AM
HI
I have switche cisco 2960
When you boot it displays the following message
So that the green lights are working well
Please help me in solving the problem
04-10-2012 02:23 AM
There's a possibilty the baud rate of your HyperTerminal client and the switch do not match.
04-10-2012 02:28 AM
Of very normal to be 9600
04-10-2012 02:31 AM
These are the settings to your hyperterminal.
9600 baud rate
No parity
8 data bits
1 stop bit
No flow control
And if these settings don't work then try to adjust the baud rate higher or lower until you tried all of them.
04-10-2012 02:47 AM
I tried changing each setting for speed, parity, etc. and connecting after each change - none of them got any output.
04-10-2012 03:15 PM
Use a different client/computer/laptop.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide