09-04-2015 09:03 AM - edited 03-08-2019 01:38 AM
Good afternoon. I had a problem with VSS , causing the complete collapse of CORE, please help.
CORE-HCUA#show version
Cisco IOS Software, s2t54 Software (s2t54-ADVIPSERVICESK9-M), Version 15.1(2)SY, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Wed 04-Sep-13 12:37 by prod_rel_team
ROM: System Bootstrap, Version 12.2(50r)SYS2, RELEASE SOFTWARE (fc1)
CORE-HCUA uptime is 3 days, 18 hours, 6 minutes
Uptime for this control processor is 3 days, 18 hours, 13 minutes
System returned to ROM by power on
System restarted at 17:42:03 CL Mon Aug 31 2015
System image file is "bootdisk:s2t54-advipservicesk9-mz.SPA.151-2.SY.bin"
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C6509-E (M8572) processor (revision ) with 1785856K/262144K bytes of memory.
Processor board ID SMG1644N02C
CPU: MPC8572_E, Version: 2.2, (0x80E80022)
CORE: E500, Version: 3.0, (0x80210030)
CPU:1500MHz, CCB:600MHz, DDR:600MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Last reset from power-on
25 Virtual Ethernet interfaces
212 Gigabit Ethernet interfaces
40 Ten Gigabit Ethernet interfaces
2543K bytes of non-volatile configuration memory.
Configuration register is 0x2102
CORE-HCUA#
CORE-HCUA#show switch virtual
Switch mode : Virtual Switch
Virtual switch domain number : 100
Local switch number : 1
Local switch operational role: Virtual Switch Active
Peer switch number : 2
Peer switch operational role : Virtual Switch Standby
CORE-HCUA#
CORE-HCUA#show switch virtual link
VSL Status : UP
VSL Uptime : 3 days, 18 hours, 54 minutes
VSL SCP Ping : Pass
VSL ICC Ping : Pass
VSL Control Link : Te1/5/5
VSL Encryption : Configured Mode - Off, Operational Mode - Off
CORE-HCUA#
CORE-HCUA#show switch virtual role
RRP information for Instance 1
--------------------------------------------------------------------
Valid Flags Peer Preferred Reserved
Count Peer Peer
--------------------------------------------------------------------
TRUE V 1 1 1
Switch Switch Status Priority Role Local Remote
Number Oper(Conf) SID SID
--------------------------------------------------------------------
LOCAL 1 UP 200(200) ACTIVE 0 0
REMOTE 2 UP 100(100) STANDBY 602 2042
Peer 0 represents the local switch
Flags : V - Valid
In dual-active recovery mode: No
CORE-HCUA#
Attachment with logg.
09-04-2015 12:21 PM
According to the output of show commands you posted, the VSL link and overall VSS seems to be ok.
What is the issue?
HTH
09-04-2015 12:39 PM
09-04-2015 02:40 PM
There are a lot of hardware and software error messages n the log. Open a case with TAC. They maybe able to find a resolution for this.
HTH
09-07-2015 05:15 AM
Thanks. I have a question... what is this?
Aug 31 16:46:24 CL: %SYS-SW2-2-NULLCHUNK: Memory requested from Null Chunk -Process= "RF Slave Main Thread", ipl= 0, pid= 17
-Traceback= 70D4C3Cz 88D41CCz 88D6528z 5F1F730z 5F1FA28z 5F22E8Cz 6B86E00z 6B871B0z 6B87454z 6B88678z 6B8877Cz 71BEB18z 71BEC18z 71C0A34z 6B88B54z 6B88BA8z
Regards!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide