cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1239
Views
0
Helpful
2
Replies

problem with ASR 1001 licence IPSEC

lotfi.bouhaddad
Level 1
Level 1

Hi,

I have a problem with a licence for ASR 1001 router, We buy for our client 2 licence in order to have IPSEC VPN configured on the ASR, The licences are : advipservices and IPSEC.

After installing the licences on the box, the show licence give us this output:

MLV-CIS-Internet-1#show license

License Store: Primary License Storage

StoreIndex:  0  Feature: ipbase                            Version: 1.0

        License Type: Permanent

        License State: Active, Not in Use

        License Count: Non-Counted

        License Priority: Medium

License Store: Primary License Storage

StoreIndex:  1  Feature: advipservices                     Version: 1.0

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

License Store: Primary License Storage

StoreIndex:  2  Feature: ipsec                             Version: 1.0

        License Type: Permanent

       License State: Active, Not in Use

        License Count: Non-Counted

        License Priority: Medium

it looks like the IPSEC licence is not in use even after showing "successful installed license"

Please help.

Hers is the show version of the box and the show license feature:

MLV-CIS-Internet-1#show version

Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.1(3)S6, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2013 by Cisco Systems, Inc.

Compiled Mon 09-Sep-13 10:37 by mcpre

MLV-CIS-Internet-1 uptime is 4 weeks, 1 day, 19 hours, 25 minutes

Uptime for this control processor is 4 weeks, 1 day, 19 hours, 26 minutes

System returned to ROM by reload

System image file is "bootflash:/asr1001-universalk9.03.04.06.S.151-3.S6.bin"

Last reload reason: Reload Command

MLV-CIS-Internet-1#  show license feature

Feature name        Enforcement   Evaluation  Clear Allowed  Enabled

adventerprise                           yes           no          yes            no    

advipservices                           yes           no          yes            yes   

ipbase                                       no            no          yes            no    

throughput                              yes           no          yes            no    

internal_service                        yes           no          yes            no    

sw_redundancy                           yes           no          yes            no    

ipsec                                        yes           no          yes            no    

Thanks

Lotfi

2 Replies 2

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

have you actually try to create and IPsec tunnel and see if it works?

If not, you can also use the "clear license" command and reinstall it again.

HTH

Hi,

I can't test IPSEC tunnel without being sure that the license is working as we need to make down the system just one time.

The clear of license donsn't wotk...

What I need to know, is if I really need the IPSEC license in order to have tunnel UP or is it just an optionnal one ?

Thanks

Lotfi

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card