03-01-2014 05:30 AM - edited 03-07-2019 06:28 PM
Hi,
I have a problem with a licence for ASR 1001 router, We buy for our client 2 licence in order to have IPSEC VPN configured on the ASR, The licences are : advipservices and IPSEC.
After installing the licences on the box, the show licence give us this output:
MLV-CIS-Internet-1#show license
License Store: Primary License Storage
StoreIndex: 0 Feature: ipbase Version: 1.0
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
License Store: Primary License Storage
StoreIndex: 1 Feature: advipservices Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
License Store: Primary License Storage
StoreIndex: 2 Feature: ipsec Version: 1.0
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
it looks like the IPSEC licence is not in use even after showing "successful installed license"
Please help.
Hers is the show version of the box and the show license feature:
MLV-CIS-Internet-1#show version
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.1(3)S6, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 09-Sep-13 10:37 by mcpre
MLV-CIS-Internet-1 uptime is 4 weeks, 1 day, 19 hours, 25 minutes
Uptime for this control processor is 4 weeks, 1 day, 19 hours, 26 minutes
System returned to ROM by reload
System image file is "bootflash:/asr1001-universalk9.03.04.06.S.151-3.S6.bin"
Last reload reason: Reload Command
MLV-CIS-Internet-1# show license feature
Feature name Enforcement Evaluation Clear Allowed Enabled
adventerprise yes no yes no
advipservices yes no yes yes
ipbase no no yes no
throughput yes no yes no
internal_service yes no yes no
sw_redundancy yes no yes no
ipsec yes no yes no
Thanks
Lotfi
03-01-2014 10:36 AM
Hi,
have you actually try to create and IPsec tunnel and see if it works?
If not, you can also use the "clear license" command and reinstall it again.
HTH
03-02-2014 09:16 AM
Hi,
I can't test IPSEC tunnel without being sure that the license is working as we need to make down the system just one time.
The clear of license donsn't wotk...
What I need to know, is if I really need the IPSEC license in order to have tunnel UP or is it just an optionnal one ?
Thanks
Lotfi
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide