Hi,
I have a problem with command :
Switch(config-if)#switchport mode access
Switch(config-if)#switchport voice vlan <Voice VLAN ID>
Switch(config-if)#switchport access vlan <VLAN ID>
"Switchport voice vlan" is not recognized. My switch is the SG500-28P.
This the print of show running connfig :
config-file-header
switche64d9a
v1.4.5.02 / R800_NIK_1_4_194_194
CLI v1.0
set system mode switch queues-mode 4
file SSD indicator encrypted
@
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
!
vlan database
vlan 5,10,20,30,100,200
exit
voice vlan id 20
voice vlan cos 5
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
hostname switche64d9a
no passwords complexity enable
username cisco password encrypted 7af78c911d5b48bea1dc2449d9d89513abeb4be5 privilege 15
ip ssh server
ip telnet server
!
interface vlan 200
ip address 192.168.200.4 255.255.255.0
no ip address dhcp
!
interface gigabitethernet1/1/1
spanning-tree link-type point-to-point
switchport trunk allowed vlan add 5,10,20,30,100,200
macro description switch
!next command is internal.
macro auto smartport dynamic_type switch
!
interface gigabitethernet1/1/2
switchport mode access
switchport access vlan 5
voice vlan cos mode all
!
interface gigabitethernet1/1/3
switchport mode access
switchport access vlan 20
