Hi,
I have a strange issue on a 801 ISDN router, I wanted to upgrade my IOS and deleted the file from flash, afterwards I did a squeeze . When I did a dir flash: it showed only the tinyrom file. When I did a show flash: I still saw my deleted file .This is the first strange issue .
I rebooted the router and could still boot from the deleted file ...
I booted in rommon mode and deleted the file over there and I followed the procedure for upgrading an IOS on a 800 router. It start to download the IOS image but after a couple of seconds it stops with a buffer overflow. I tried with shorter name but this didn't help.
Can somebody give me a hint what the problem is ?
When I start downloading I see a file name which can't be removed . (c800-sy6-mw) . What is this ?
boot# set
set baud =9600
set data-bits =8
set parity =none
set stop-bits =1
set console-flags =0
set mac-address =00B0.64BA.116A
set unit-ip =10.23.113.206
set serv-ip =10.23.11.249
set netmask =255.255.254.0
set gate-ip =10.23.113.254
set pkt-timeout =8
set tftp-timeout =16
set boot-action =none
set file-name ="c800-sy6-mw"
set watchdog =off
set prompt ="boot"
set ios-conf =0
boot# upload tftp
pload: failed, "command not found"
boot# upload tftp
TFTP initiated.
Build [ccai 21] -- Mon Nov 6 16:55:58 PST 2006
File name: c800-sy6-mw
RAM size: 0x00c48b55 (12880725)
Raw size: 0x00b8c831 (12109873)
Image size: 0x005d0d0c (6098188)
|>>>>>>>>>-------+----------------+----------------+----------------|
Error 7 at offset 899304.
upload: failed (3 seconds), "buffer overflow"
boot#
