I have c7000 HP blade Center with ProCurve 6120XG Blade Switch and i am creating trunk to my TOR1 Cisco switch (Nexus 3064), but having issue related VLAN traffic.
[HP 6120XG]------10G-------[Nexus 3064]
Cisco port e1/18 config:
interface Ethernet1/18
description ### Blade-Switch-6120X-A ###
switchport mode trunk
switchport trunk allowed vlan 30
spanning-tree guard root
HP 6120XG ( Interface 18 connected to Cisco switch port e1/18), I have put VLAN tagged on port 18 but my server can't ping, something is wrong or i didn't configure correctly..
ProCurve 6120XG Blade Switch# sh run
Running configuration:
; 516733-B21 Configuration Editor; Created on release #Z.14.44
hostname "ProCurve 6120XG Blade Switch"
interface 23
disable
lacp Active
exit
interface 24
disable
lacp Active
exit
interface 18
name "uplink"
exit
interface 19
name "uplink"
exit
vlan 1
name "DEFAULT_VLAN"
untagged 17,19-24
ip address dhcp-bootp
no untagged 1-16,18
exit
vlan 30
name "LAN"
untagged 1-16
tagged 18
no ip address
exit
snmp-server community "public" unrestricted
spanning-tree
oobm
ip address 10.0.0.152 255.255.248.0
ip default-gateway 10.5.0.1
exit
uplink-failure-detection