Page not found

syrnrsc01 · ‎02-06-2014

we have inserted pvdm3 module in to the 2901 router

but its LED status is showing Amber continuolsly.

I would like configure the FXS card but I am not able to get dial-peer command.

Can any ony help?

Its sh diag command giving the following output.

/#sh diag

Slot 0:

C2901 Mother board 2GE, integrated VPN and 4W Port adapter, 4 ports

Port adapter is analyzed

Port adapter insertion time 00:58:11 ago

EEPROM contents at hardware discovery:

PCB Serial Number : FOC16310CSA

Hardware Revision : 1.0

Part Number : 73-11834-09

Top Assy. Part Number : 800-30795-05

Board Revision : A0

Deviation Number : 0

Fab Version : 03

Product (FRU) Number : CISCO2901/K9

Version Identifier : V05

CLEI Code : CMMHB10ARA

Processor type : C1

Chassis Serial Number : FGL16312126

Chassis MAC Address : 6073.5c26.7440

MAC Address block size : 72

Manufacturing Test Data : 00 00 00 00 00 00 00 00

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF C1 8B 46 4F 43 31 36 33 31 30 43 53 41 40

0x10: 06 17 41 01 00 82 49 2E 3A 09 C0 46 03 20 00 78

0x20: 4B 05 42 41 30 88 00 00 00 00 02 03 CB 8C 43 49

0x30: 53 43 4F 32 39 30 31 2F 4B 39 89 56 30 35 20 D9

0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 48 42 31 30 41 52

0x50: 41 09 C1 C2 8B 46 47 4C 31 36 33 31 32 31 32 36

0x60: C3 06 60 73 5C 26 74 40 43 00 48 C4 08 00 00 00

0x70: 00 00 00 00 00 F3 00 65 40 01 25 41 00 87 42 00

0x80: 00 F8 00 28 03 E8 1C 89 07 D0 20 21 0B B8 20 93

0x90: 0F A0 21 2F 13 88 21 83 17 70 21 A8 1B 58 21 B0

0xA0: 1F 40 21 AB 23 28 21 79 27 10 21 78 41 01 1D 42

0xB0: 00 00 F8 00 28 03 E8 1C 20 07 D0 1F 40 0B B8 20

0xC0: 6C 0F A0 21 34 13 88 21 34 17 70 21 98 1B 58 21

0xD0: 98 1F 40 21 98 23 28 21 34 27 10 21 34 FF FF FF

0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

PVDM Slot 1:

16-channel (G.711) Voice/Fax PVDM3 DSP DIMM PVDM daughter card

Hardware Revision : 1.0

Part Number : 73-11576-03

Board Revision : C0

Deviation Number : 0

Fab Version : 03

PCB Serial Number : FOC162257KD

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Processor type : 00

Product (FRU) Number : PVDM3-16

Version Identifier : V01

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 05 D8 41 01 00 82 49 2D 38 03 42 43 30

0x10: 88 00 00 00 00 02 03 C1 8B 46 4F 43 31 36 32 32

0x20: 35 37 4B 44 03 00 81 00 00 00 00 04 00 09 00 CB

0x30: 8F 50 56 44 4D 33 2D 31 36 20 20 20 20 20 20 20

0x40: 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF FF FF

0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC Slot 0:

3rd generation - FXS DID Voice daughter card (2 port)

Hardware Revision : 1.0

Top Assy. Part Number : 800-30501-02

Board Revision : A0

Deviation Number : 0

Fab Version : 07

PCB Serial Number : FOC1350420M

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Product (FRU) Number : VIC3-2FXS/DID

Version Identifier : V02

CLEI Code : IP9IAB3CAB

Longitudinal Calibration : 01 10 10 4F 8D 10 10 8F

9F

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 06 21 41 01 00 C0 46 03 20 00 77 25 02

0x10: 42 41 30 88 00 00 00 00 02 07 C1 8B 46 4F 43 31

0x20: 33 35 30 34 32 30 4D 03 00 81 00 00 00 00 04 00

0x30: CB 8D 56 49 43 33 2D 32 46 58 53 2F 44 49 44 89

0x40: 56 30 32 20 D9 02 40 C1 C6 8A 49 50 39 49 41 42

0x50: 33 43 41 42 D3 09 01 10 10 4F 8D 10 10 8F 9F FF

0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Embedded Service Engine 0/0 :

Total platform memory : 524288K bytes

Total 2nd core memory : 0K bytes

Start of physical address for 2nd core : 0x80000000

Virtual address start of 2nd core memory : 0x0 - 0x0

2nd core configured disabled

L2 cache ways for 2nd core : 0

Its sh running-conf command giving the following output.

/#sh running-config

Building configuration...

Current configuration : 1228 bytes

!

! Last configuration change at 06:29:29 UTC Fri Feb 7 2014

version 15.1

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname /

!

boot-start-marker

boot-end-marker

!

enable secret 4 tnhtc92DXBhelxjYk8LWJrPV36S2i4ntXrpb4RFmfqY

!

no aaa new-model

!

no ipv6 cef

ip source-route

ip cef

!

multilink bundle-name authenticated

!

crypto pki token default removal timeout 0

!

license udi pid CISCO2901/K9 sn FGL16312126

hw-module pvdm 0/1

!

username cisco

!

interface Embedded-Service-Engine0/0

no ip address

no ip route-cache

shutdown

!

interface GigabitEthernet0/0

ip address 172.169.2.152 255.255.255.0

duplex auto

speed auto

!

interface GigabitEthernet0/1

no ip address

duplex auto

speed auto

!

ip forward-protocol nd

!

no ip http server

no ip http secure-server

!

control-plane

!

line con 0

line aux 0

line 2

no activation-character

no exec

transport preferred none

transport input all

transport output pad telnet rlogin lapb-ta mop udptn v120 ssh

stopbits 1

line vty 0 4

password cisco

login

transport input all

line vty 5 15

password cisco

login

transport input all

!

scheduler allocate 20000 1000

end

and sh flash giving me the following output.

/#sh flash

-#- --length-- -----date/time------ path

1 74503236 Jul 30 2012 20:08:54 +00:00 c2900-universalk9-mz.SPA.151-4.M4.bin

2 2903 Jul 30 2012 20:21:54 +00:00 cpconfig-29xx.cfg

3 3000320 Jul 30 2012 20:22:10 +00:00 cpexpress.tar

4 1038 Jul 30 2012 20:22:18 +00:00 home.shtml

5 122880 Jul 30 2012 20:22:26 +00:00 home.tar

6 1697952 Jul 30 2012 20:22:40 +00:00 securedesktop-ios-3.1.1.45-k9.pkg

7 415956 Jul 30 2012 20:22:54 +00:00 sslclient-win-1.1.4.176.pkg

176730112 bytes available (79757312 bytes used)

Leo Laohoo · ‎02-11-2014

Duplicate posts.

Go here: https://supportforums.cisco.com/thread/2266233

confreg01 · ‎12-17-2024

Cisco Community

Page not found

Page not found

The page you are trying to access was not found. Please check your URL for typos and try again.

PVDM3 led status Amber in 2901 Router??

Page not found