Switch Configuration
Switch 1 - Port 1/0/7 to CPE
Port 1/0/8 to Switch 2 Port 1/0/5
Switch 2 - Port 1/0/8 to Swith 3 Port 1/0/5
Switch 3 - Port 1/0/6 to untagged device on VLAN 1130
Port 1/0/5 & 1/0/8 - Trunk - Tagged 2500
Port 1/0/7 - Customer Mode - Untagged 2500
Port 1/0/6 - Access - 1130
I have three switches with the same configuration, I have one device tagged with VLAN 1130 connected to port 1/0/7 and one device untagged connected to port 1/0/6. However, I cant seem to have the two devices talking to each other is there any that I can get the two to talk. Port 1/0/7 must be in customer mode and port 1/0/6 connects to other devices in VLAN 1130. When both devices are tagged and in port 1/0/7 on the 2 end switches they talk, but I need the traffic to leave 1/0/6 in acces mode on VLAN 1130.
This is all new to me and cannot seem to find the right way to do it, any help would be appreciated!
Thank you.