cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

220
Views
5
Helpful
1
Replies
Highlighted
Beginner

QOS - Marking Queuing

Just want clarification on the end result of this setup. Thanks

 

Scenario:
Traffic being Marked with DSCP on ingress.
My Egress Queue is FIFO
Shaper Only being used by ISP on Egress out to WAN to restrict to 95 Mbps

 

Traffic Flow
SITE1: LAN---->My Router---->ISP ROUTER--->WAN---->SITE2: ISP ROUTER---->My Router---->LAN


Will the traffic with Higher DSCP Values be prioritised?

Thanks
Simon

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Expert

Re: QOS - Marking Queuing

"Will the traffic with Higher DSCP Values be prioritised?"

Cannot say. On devices under your control, you should be able to answer that for yourself. For 3rd party devices, you'll need to ask the 3rd party, although generally the answers is no unless it's a dedicated private WAN link and then the 3rd party might optionally offer QoS support.

View solution in original post

1 REPLY 1
VIP Expert

Re: QOS - Marking Queuing

"Will the traffic with Higher DSCP Values be prioritised?"

Cannot say. On devices under your control, you should be able to answer that for yourself. For 3rd party devices, you'll need to ask the 3rd party, although generally the answers is no unless it's a dedicated private WAN link and then the 3rd party might optionally offer QoS support.

View solution in original post

CreatePlease to create content
Content for Community-Ad