QOS non-cisco softphone?

[the-lebowski]

We recently migrated some of our voice to a 3rd party IVR off our on-prem CUCM.  In doing so the users phones moved from their desk (voice vlan using auto QOS) to a softphone (non-cisco) running on their workstations (data vlan).  I am wondering what I need to do to apply QOS to the data vlan for voice traffic on the LAN?  I had good luck with the 'auto qos voip cisco-phone' and so forth but that was with the phones on a dedicated voice vlan.   

This is what we were using..but not really doing anything now as users aren't using their desk phones.  

 power inline auto max 15400
 srr-queue bandwidth share 10 10 60 20
 queue-set 2
 priority-queue out
 mls qos trust device cisco-phone
 mls qos trust cos
 auto qos voip cisco-phone
 spanning-tree portfast
 service-policy input AutoQoS-Police-CiscoPhone 

[balsamovan]

We use the following on our environment for access ports:

switchport mode access
switchport nonegotiate
switchport access vlan xx
switchport voice vlan xx 
srr-queue bandwidth share 1 30 35 5
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
auto qos trust

In addition, we have a Windows AD that pushes the EF-bit for voice traffic to client workstations via Group Policy, but you could probably set this manually in the softphone app. Thsi way voice packets are tagged accordingly.

[Mark Malone]

Hi
Once the softphone is tagging the packet before it hits the port mls qos trust dscp will work and carry the marking but I would make sure the SP is tagging it first correctly , I would span one of the SP access ports and check the Wireshark for the packet and make sure the EF bit is present in it.