09-13-2015 11:13 AM - edited 03-08-2019 01:44 AM
Hi,
Our switch got reloaded once, after reload we found that "ip dhcp snooping trust" command disappeared from physical interfaces.
Tried to find a bug related to the same software but couldn't find.
IOS version: 15.2(3)E
HW model: 3560x
Thanks
09-13-2015 11:50 AM
Hi,
It could be that the configuration was not saved and after the reboot the switch went back to an older config that did not have "ip dhcp snooping trust" configuration.
HTH
09-13-2015 12:04 PM
Thanks Reza, the configurations were saved already, although configurations were disappeared from physical interfaces, it was still there on the PO level, but not working.
09-13-2015 01:23 PM
Hi,
Did the switch reloaded on its own, or this was a manual reboot? If it reloaded on its own, is there crash file written on the flash? If it did than there maybe an IOS bug that is causing it to reboot. Anything in the logs?
HTH
09-13-2015 08:30 PM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: