06-14-2013 02:39 AM - edited 03-07-2019 01:53 PM
Hi All,
We have several of these WS-C2960S-24PS-L running 12.2(55)SE5 C2960S-universalK9-M and need to upgrade to a better
IOS since we have a sitution where CPU would get to 100% but we have only a few ports connected.
Also we have several of WS-C3750-48P running 12.2(55) SE6 C3750-IPBASEK9-M.
Any recommendation is greatly appreciated.
QL
Solved! Go to Solution.
06-14-2013 03:11 AM
06-14-2013 03:12 AM
Quick and Easy Answer:
3750/3600 series:-I recommend a "stable" IOS, then 12.2(55)SE7 . This is followed by 15.0(2)SE2(If you required 802.1x support) else 12.2(55)SE7 is the best.
2900:- 15.0(2)SE2 works well with 2960/G/S even with 802.1x.
Plz as of now dont upgrade the switches to 15.0(3)SE3.
Hope this answered your query.
Regards
Inayath
*Plz rate this post if usefull and mark the thread as answered.
06-14-2013 03:11 AM
2960S = 15.0(2)SE2
3750 = 12.2(55)SE7
06-14-2013 03:12 AM
Quick and Easy Answer:
3750/3600 series:-I recommend a "stable" IOS, then 12.2(55)SE7 . This is followed by 15.0(2)SE2(If you required 802.1x support) else 12.2(55)SE7 is the best.
2900:- 15.0(2)SE2 works well with 2960/G/S even with 802.1x.
Plz as of now dont upgrade the switches to 15.0(3)SE3.
Hope this answered your query.
Regards
Inayath
*Plz rate this post if usefull and mark the thread as answered.
06-14-2013 07:07 AM
Thank you all for a quick response.
will upgrade IOS accordingly,.
Thanks again.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide