redistribution

[carl_townshend]

Hi all, If I wanted to redistribute eigrp 100 into 200 and vice versa, Do I need to set any metrics ?

[Jon Marshall]

Hi Carl

You don't need to set metrics if you are redistributing between eigrp processes. You set metrics when the routing protocols you are redistributing between use different metrics eg RIP - hop count, OSPF - cost etc.

HTH

Jon

[carl_townshend]

Thanks, So when I redistribute one in to the other, Will they both know about all routes in each others AS ?

[Jon Marshall]

Hi Carl

Yes they will if you redistribute both ways. You need to be careful when doing mutual redistribution between routing protocols.

Here's a link covering routing protocol redistribution. Have a look at example 3 in the Problems section which cover redistributing between EIGRP processes.

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009487e.shtml

HTH

Jon