We have a special requirement. One of the server (WEB server ) in DMZ should be restricted from accesssing other servers and also other servers should be restricted from accessing this particular server, I have created Private vlan as below.
private-vlan association 20,30
Then configured the port which the web server connected as ioslated vlan ,
Yes we have configured promiscous, we dont need webserver to communicate with other servers and that is achieved by configured as isolated port , also other servers which are connected under community port should not talk to webserver. Will this be possible ??
Hi, here is an example how to configure IP-NAT, GRE, IPSEC. I've seen plenty of questions and this might be a good solution! (Mostly the use of commands that might remind u) IP NAT======================================================================...
Hi everyone.I have a problem in my Network.So i have 3 routers and a firewall in my topology. I have configured OSPF and all routers works expect R3 (see in the image below)When I watch my neignbor in R3 it says :192.168.7.7 1 INIT/DROTHER 00:00:37 10.0.2...
Host Onboarding is the term used when connecting an endpoint (hosts , IOT , Other devices) to the fabric , and can be accomplished in a couple of ways.One option is the "static" approach as oppose to the dynamic and secure approach using&nbs...
good morning I have this report from users, saying that they encounter connection issue only when they are wired , but the wireless I fine. both connection are using the same path to the internet ...please advised a troubleshooting plan.