registering license, command unavailable

[m.lrhomari]

Hi

we have bought some c9200 switches with network essentials and dna essentials

we have installed a satellite SCCM on premise

now we are trying to register our devices

but unfortunately the command (license smart register idtoken) is unavailable

our SW version :17.03.04b

******************************************************************************

there is no REGISTER

Switch#license smart ?
authorization Authorization
clear Clear
export Get or return an export authorization key
factory Execute Smart Licensing Factory commands
import Import authcode, policies, trustcode etc
save Save
sync Sync with CSLU/CSSM.
trust Establish trust between PI and CSLU/CSSM.

Switch#

******************************************************************************

Switch(config)#license smart ?
custom_id Set a customer defined id
enable Smart licensing is Permanently configured, This cli
will have no effect
privacy privacy related commands
proxy proxy related commands
reservation Enable or disable the license reservation feature
server-identity-check Enable or disable the HTTP secure server identity
check
transport Select the type of message transport for Smart Agent
url Set the Smart Transport Primary and the Utility URL
usage Entitlement usage.
utility Enable or disable usage reporting on the device

Switch(config)#

******************************************************************************

Thanks

[Flavio Miranda]

hi

license smart transport callhome

call-home

! If contact email address in call-home is configured as sch-smart-licensing@cisco.com

! the email address configured in Cisco Smart License Portal will be used as contact email address to send SCH notifications.

contact-email-addr sch-smart-licensing@cisco.com

source-interface Loopback0 (Depending on your environment)

no http secure server-identity-check

profile "CiscoTAC-1"

active

destination transport-method http

destination address http http://X.X.X.X/Transportgateway/services/DeviceRequestHandler

no destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService

X.X.X.X is your on premise CSSM.

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9200/software/release/16-12/configuration_guide/sys_mgmt/b_1612_sys_mgmt_9200_cg/cisco_smart_licensing_client.html#concept_o2x_fvp_qgb 

[m.lrhomari]

Hi

Thanks for your reply

i've been already following

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9200/software/release/17-3/configuration_guide/sys_mgmt/b_173_sys_mgmt_9200_cg/cisco_smart_licensing_client.html
chapter : Configuring Smart Licensing
article : Configuring the Call Home Service for Cisco Smart Software Manager On-Prem

so all the past commands already done

but after that, you have to generate a token in your CSSM then register your device using the generated token

so in this step, i cannot find the command in the guide, as i said, there is no register for (license smart) command

Thanks

[Leo Laohoo · Accepted solution]

---

@m.lrhomari wrote:

our SW version :17.03.04b

---

New "norm" behaviour because the switch is on 17.3.4b:  New Deployment Method for Smart Licensing