replicate traffic using PBR

[suhas_syndrome]

Hi,

my two HO router is connected in MPLS cloud behind HO1 router web server 1 is connected. i want from MPLS cloud any branch (A, B or C) when want to go to WEB SERVER-1. HO-1 router should be replicate that tropic to WEB SERVER-2 which is behind connected to HO-2 router.

1) what acl should be configure on HO-1

2) It need to create Route-Map

3) Or static NAT

Regards

Suhas

[cadet alain]

Hi,

let me try to understand: you want traffic going to webserver1 and in case of failure go to webserver2 ? or you want some traffic going to webserver1 and other going to webserver 2  for load balancing ?

Regards.

Alain

Don't forget to rate helpful posts.

[suhas_syndrome]

Hi,

No i do not want any load balancing, i want  when any branch from mpls cloud access WEB SERVER-1 ip add HO-1 router should be redirect this traffic which has come for WEB SERVER-1 to HO-2 Router and that can access WEB SERVER-2.

which branch from MPLS cloud is accessing WEB SERVER1 should not know that we are accessing HO-2 WEB SERVER.

Regards

Suhas