Rest API documentation for Catalyst 9000 switches

[mario.jost]

I am looking for the official Rest API documentation to get the correct syntax to configure devices via PUT command.

I am looking for something like this API Explorer but for Cisco switches:
https://dropbox.github.io/dropbox-api-v2-explorer/#file_properties_properties/update

I do get some URLs while GETting configurations from my device (Catalyst 9200 switch), but all the URLs are 404:

<GigabitEthernet xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-native" xmlns:ios="http://cisco.com/ns/yang/Cisco-IOS-XE-native">
  <name>1/0/17</name>
  <description>dontmakestupidpeoplefamous</description>
  <switchport>
    <trunk xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-switch">
      <native>
        <vlan>225</vlan>
      </native>
    </trunk>
  </switchport>
  <source>
    <template>
      <template-name>
        <template-name>LAN</template-name>
      </template-name>
    </template>
  </source>
</GigabitEthernet>

I have already seen similar questions pop up multiple times, but in all of them, the answers seem to miss the topic. This is not a question what I want to configure in detail, or what tool I use to configure it. Thses questions are irrelevant. I just want to know where i can find the API Documentation / Browser / Explorer for these devices.

[marce1000]

  - Check if this guide can help you :

          https://www.cisco.com/c/en/us/td/docs/routers/csr1000/software/restapi/restapi.html

 M,

[mario.jost]

This documentation is for CSR1000 routers (can even be seen in the URL) and the syntax looks very different from the ones on the catalyst switches. Example CSR:

curl -k https://router/api/v1/l2interfaces/GigabitEthernet2 -u "ad:min"
curl -k http://router/api/v1/nat-svc/pool/marketing-nat-pool -u "ad:min"

Examples Catalyst:

curl -k https://switch/restconf/data/Cisco-IOS-XE-native:native/interface/GigabitEthernet=1%2F0%2F2 -u "ad:min"
curl -k https://switch/restconf/data/Cisco-IOS-XE-native:native/snmp/ -u "ad:min"

If the documentation could be found by a simple google search, I woulnt have created this post.

[brownm5]

I found a couple of links that might be helpful.  First, this:https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/176/b_176_programmability_cg/m_176_prog_restconf.html

It wasn't very helpful to me, but it looks like there is some useful information there. 

This one was much more helpful: https://www.postman.com/ciscodevnet/workspace/cisco-devnet-s-public-workspace/request/3224967-f0f72532-294f-4a0c-a54b-cbc2feca8a6f

It contains specific examples of API calls. 

Hope you find this helpful.

Cheers!