rip problem

[jencomartin]

Hi.

I'm trying to solve one lab and i have problem with rip.

there are 2 routers (let's call them R1 and R2).

R1 have learned routes to networks 10.1.1.0/24, 10.1.2.0/24 etc.

R1 does not propagate this routes to R2.

There is rip v1 between the routers,

there is network 10.1.128.0/23 between the routers.

what can i do to get this routes from R1 to R2?

I must use rip version 1, i can't change addresses, subnet masks, I can't use any sumarization technique.

any ideas?

thanx

[Route_reflector]

Hi,

Sine you are using classless networks, there is no other way than configuring this as RIPV2.

Try RIPV2 if you can..

Rgds