10-01-2012 02:45 AM - edited 03-07-2019 09:12 AM
Guys,
I have cisco switch 3550 IOS Version 12.1(19)EA1c.
I can configure route-map commands on that. but i can not apply that into any vlan interface. while i try to apply the following command ( ip policy route-map PBR) on VLAN int i get an error msg saying that the command is not recognized.
plz tell me wat is the issue
10-01-2012 02:56 AM
HI Imran,
2 things to check -
1) are you running IP services/Advanced service (eg. not IP Base). You need to be.-
2) if you are running the right feature set have you enabled the SDM routing template.
please paste the output of this:
show sdm prefer
which ios version u r running ??
if you have ip services IOS then,
You must change the sdm template: sdm prefer extended-match or sdm prefer routing extended-match or sdm prefer access extended-match.
the switch must have IP services image installed.
Reagrds
Please rate if it helps.
10-01-2012 04:40 AM
Ihv mentioned my ios verion above. and i am running ip base ios
this is the output
VTP#sh sdm prefer
The current template is the default template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1K VLANs.
number of unicast mac addresses: 5K
number of igmp groups: 1K
number of qos aces: 1K
number of security aces: 1K
number of unicast routes: 8K
number of multicast routes: 1K
VTP#sho ver
Cisco Internetwork Operating System Software
IOS (tm) C3550 Software (C3550-I9Q3L2-M), Version 12.1(19)EA1c, RELEASE SOFTWARE (fc
2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Tue 03-Feb-04 04:47 by yenanh
Image text-base: 0x00003000, data-base: 0x0069B5C0
---
This command (ip policy route-map ..) is not recognized on the switch at all.
10-01-2012 04:45 AM
HI Imran,
Ihv mentioned my ios verion above. and i am running ip base ios
You need IP services/Advanced service IOS to use this feature.
It will not work with IP Base.
Regards
Please rate if it helps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide