12-13-2016 10:45 PM - edited 03-08-2019 08:33 AM
Hi All,
Hope you are doing well.
I configure below mentioned a route-map and apply on an interface vlan.
Extended IP access list 181
20 permit ip any host 202.142.160.2
30 permit ip any host 202.141.224.34
40 permit ip any host 8.8.8.8
50 permit ip any host 103.226.216.206
51 permit ip any host 51.254.56.70
52 permit ip any host 198.50.178.194
81 permit ip any host 136.243.113.211
82 permit ip any host 104.24.111.87
83 permit ip any host 58.27.231.67
DHA-Core-SW#sh access-lists 182
Extended IP access list 182
10 permit ip any host 144.76.228.228
20 permit ip any host 174.142.210.172
30 permit ip any host 192.99.161.36
40 permit ip any host 174.142.210.178
51 permit ip any host 51.254.56.70
52 permit ip any host 198.50.178.194
60 permit ip any host 209.188.25.102
70 permit ip any host 103.226.216.206
80 permit ip any host 144.76.203.48
90 permit ip any host 62.210.167.204
91 permit ip host 172.16.41.141 192.30.252.0 0.0.0.255
92 permit ip host 172.16.31.159 192.30.252.0 0.0.0.255
95 permit ip 172.16.129.0 0.0.0.255 any
!
route-map bypassproxy permit 181
match ip address 181 182
set ip next-hop 192.168.13.249
!
!
interface Vlan71
description Basement zone A with 172.16.71.254/24 subnet
ip address 172.16.71.254 255.255.255.0
ip policy route-map bypassproxy
end
But its not working. Please help me.
Thanks a lot.
Navaz
12-14-2016 01:09 AM
Hello Navaz,
what device is this configured on (e.g. 3750 switch) ?
12-14-2016 01:12 AM
Hi,
switch is 4506 8E.
12-14-2016 01:32 AM
Navaz,
stupid question maybe, but are you running an Enterprise IOS on your switch ? IP Base does not support Policy Based Routing...
Can you post the output of 'show version' ?
12-14-2016 01:35 AM
DHA-Core-SW#sh version
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500es8-UNIVERSALK9-M), Version 03.06.00.E RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 27-Jun-14 05:55 by prod_rel_team
Cisco IOS-XE software, Copyright (c) 2005-2014 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.
(http://www.gnu.org/licenses/gpl-2.0.html) For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: 15.1(1r)SG4
DHA-Core-SW uptime is 1 year, 20 weeks, 5 hours, 42 minutes
Uptime for this control processor is 1 year, 17 weeks, 1 day, 32 minutes
System returned to ROM by SSO Switchover
System restarted at 14:02:15 GMT Mon Aug 17 2015
System image file is "bootflash:cat4500es8-universalk9.SPA.03.06.00.E.152-2.E.bin"
Jawa Revision 3, RadTrooper Revision 0x0.0x41, Conan Revision 0x1449
Last reload reason: Reload command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
License Information for 'WS-X45-SUP8-E'
License Level: entservices Type: Permanent
Next reboot license Level: entservices
cisco WS-C4506-E (P5040) processor (revision 2) with 4194304K bytes of physical memory.
Processor board ID FXS1825Q4MT
P5040 CPU at 2.2GHz, Supervisor 8-E
Last reset from Reload
68 Virtual Ethernet interfaces
216 Gigabit Ethernet interfaces
16 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2102
12-14-2016 02:06 AM
Navaz,
you have the Enterprise version, that is fine. Do you happen to have any static routes configured on your 4506 ? If possible, post the entire config of the switch, it might be a small detail you are missing.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide