nareh84@hotmail.com
hi,
there are 3 routers connected to a switch (R1 1.1.1.1 acting as host, R2 1.1.1.2 as dns server, R3 1.1.1.3 ip i want to ping)... Following si the R1 config...
R1(config)#ip name-server 192.168.3.80
R1(config)#ip domain name yourdomain.com
following is the R2 (dns server) config
R2(config)# ip dns server
R2(config)# ip domain name yourdomain.com
R2(config)# ip host ccmip 1.1.1.3
and configured only IP on R3 router when on R1 i ping ccmip.. the ping is successful.. but when i replace pc with R1.. the ping is unsuccessful...R2 is unable to resolve the address.. there is no domain system.,.. i think i need to create domain setup.......any idea about it!!!
Regards
Naresh
Naresh
Are saying it works from R1 but not from a PC ?
If so simply add the DNS domain name and DNS IP address to the PCs IP configuration just as you did on R1. If the PC is getting an IP address from a DHCP server then you will need to update the DHCP with the DNS details.
Jon
