cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2916
Views
0
Helpful
15
Replies

Router(boot) ... issue after upgrade....

uubozou11
Level 1
Level 1

I have a uBR7100 and after the IOS upgrade last week whenever it reboots I would get the prompt of 'router(boot)'...after some troubleshooting it was decided by someone else that I had a bad image file, to get a different one. I did that this weekend and after the upgrade this morning, was greeted yet again by the 'Router(boot)' prompt. What causes the prompt to show this?

Thanks..........

15 Replies 15

Jimmy

Thank you for posting back and indicating that the problem was solved. And thank you for using the rating system to indicate that the problem was solved (and thanks for the rating). It makes the forum more useful when people can read about a problem and can know that they will read the solution to the problem.

I encourage you to continue your participation in the forum.

Happy Thanksgiving

Rick

HTH

Rick
Review Cisco Networking for a $25 gift card